1. Project Manager: Presently working with QuEST Global Engineering Pvt. Ltd. at Bangalore as a Project Manager in Power Generation Group from August 2012 managing a team of 18 engineers. (Continue
a. Project Engineering Plan, schedule, conduct and coordinate assigned project, monitor work for compliance to applicable codes and engineering practices, ensure effective communication and coordination between all interface disciplines. Manage the delivery of the supporting functions to ensure the successful delivery of the project, for example: prototype manufacture, purchasing, R&D, quality plans, production engineering, piping and arrangement.
b. Reverse Engineering Submersible pump (125 kW): Measurement of each subassembly by CMM, white light scanning, Modeling and Detail drawings. Perform Flow analysis of the pump.
c. Cost Cutting Analysis Chiller cost reduction proposal and perform FEA strength analysis.
2. Lead Engineer:
Worked with Alstom Projects India Ltd. (MNC, pioneer in power projects) at Noida as Lead Engineer in Rotating Machines Group from February 2007.till Aug. 2012.
Product Development Component selection, modification in design and cost cutting analysis of auxiliary units for new engine development. Preparation of technical specification of centrifugal pumps, valves, heat exchanger, filter, accumulator, oil vapor fan used in auxiliary units of gas turbine.
Concept Description Detailed concept description identifying the reason for selection and modification in the design of individual components of fuel oil - NOx water block.
Detail Engineering Basic concept design & detail engineering of fuel oil - NOx water block for GT26 and GT13 functional module, 3d modeling and detailing in AutoCAD / AutoDesk Inventor, preparation of layout and manufacturing drawings of the assembly.
System calculation & Operation concept Developing operation concept and performing system calculations for all mechanical auxiliary packages of gas turbine.
Hazard - Detail hazard identification analysis of lube oil system, rotor barring system, fuel gas ignition system and fuel oil - NOx water system of gas turbine as a part of machinery directive.
Flushing procedures Preparation of flushing operation process of lube oil system, cooling air system and fuel gas system for customer projects.
Project engineering Bid evaluation & review of technical document, P&ID review, manufacturing drawings from EPC contractor, vendor & design group for various mechanical packages.
Part list structure Creation of systematic part list defining complete structure of GT auxiliary blocks used for ordering in projects.
Site support activities Address NCR issues at project sites and furnish customer satisfactory solution. Prepare field service instruction for site issues, e.g. installation of ignition gas unit, replacement of pressure transmitters, level gauge.
Commissioning of BOP Packages Associated in Commissioning of BOP packages in NCR region of Alstom projects.
Basic knowledge of relevant Indian & International standards.
Packages handled within power plant for both Gas based and Thermal
i) Fuel Gas Module
ii) Fuel Gas Shut off skid
iii) Fuel Oil Nox water module
iv) Drain Tank
v) Lube Oil Module
vi) Compressor wash skid
vii) Compressor Blow off valve
viii) Propane ignition unit
ix) Control air unit
x) Purge skid
xi) Other BOP packages
I. Utran, India (1 x KA26-1 MS, 376 MW) Detail engineering of shut-off skid, inspection at shop and support work at site.
II. TKS CSA, Brazil (1 x KA11N2-2 MS, 497 MW); TEMA, Brazil (2 x GT11N2, 402 MW) Prepare flushing procedure of fuel gas and lube oil system.
III. Tuas, Singapore (1 x KA26-1 SS, 400 MW) Contract review after tendering, deliver special project specific requirements & complete order structure of GT26 U1. Created lube oil and jacking oil flushing procedure for the new engine.
IV. Al Mansurya, Iraq (4 x GT13E2 FM, 660 MW); Khulna,
Bangladesh (1 x GT13E2 FM, 150 MW); Port Harcourt 2, Nigeria (1 x GT13E2, 179 MW),
Nantian, China (1 x GT13E2, CC, 179 MW)
Tyumenskya, Russia 2 (1 x GT13E2, 179 MW) - Contract review after tendering, deliver special project specific requirements & complete order structure of GT13 E2 FM, co-ordinate between engineering teams and supplier. Review of site operation and maintenance manual for GT auxiliary systems.
3. 3rd Engineer: Joined The Shipping Corporation of India Ltd. (A Govt. Of India Undertaking) at Mumbai in December 2001 and worked till February 2007 with sailing experience on Oil tanker (GRT-28029 tonnes) and bulk carrier (GRT-31240 tonnes). Travelled around the world as Marine Engineer while working with Shipping Corpn. of India Ltd.
Trainee Marine Engineer: One year training at Kochi extending detail technical theory and practical assignments on marine engineering and shipboard knowledge.
Completed additional certification course: Fire Prevention & Fire Fighting, Elementary First Aid, Personal Safety and Social Responsibility, Personal Survival Techniques, Oil Tanker Familiarization, Medical First Aid, Proficiency in Survival Craft & Rescue Boats other than Fast Rescue Boats, Engine Simulator Course and Certificate for Service on Tankers.
5th Engineer: Watch keeping with second engineer and assisting in operation and maintenance of Refrigeration & Air Conditioning system, electro-hydraulic cranes and other onboard mechanical and electrical equipments. Detail tracing of Fuel oil system, Lube-oil system, Cooling Water system, Fresh water system, Sea water system, steam tracing system.
4th Engineer: Independent engine room shift in-charge and direct responsible of Diesel Generator (1125 kW), all reciprocating, centrifugal and gear pumps for their planned maintenance and scheduling and upkeep their spare parts inventory database. Receiving bunker and maintaining records of fuel oil onboard ship.
3rd Engineer: Independent and direct responsible of, Boiler (Water Tube type, 24 kg/cm¬2), Marine Diesel Engine (Sulzer 5 RTA 62, single screw, 7298 kW), Heat Exchangers, Heavy oil and diesel oil purifier and air compressor. Performing planned maintenance and routine inspection of all the machineries in-charge and upkeep their spare parts inventory.
4. Lecturer: Worked as a Lecturer in The Institute of Technology & Management, Gurgaon from January 2000 to December 2001.
Responsible for taking lectures of 3rd year and final year student of Mechanical Engineering. Courses covered during the tenure are Fluid Mechanics, Theory of Machines and Thermodynamics.
Taken lab of heat and mass transfer and carried out one major project for Final year students.
Taken Engineering and Machine drawing classes of first year students.
Excel based tool to register work package and hourly timesheet for automatic calculation of individual on-time delivery and productivity.
Excel based database to calculate pipe dimension based on nominal pipe size and schedule.